Default welcome msg!

MASSOTH - 8216087 - XLS DECODER SOUND MIKADO

$274.64

Availability: In stock

Only 2 left

 
OR

Quick Overview

8216087 - XLS G Gauge DCC/Sound MIKADO Steam Loco


The LGB Onboard Decoder has proven itself a thousand times since the turn of the millennium.
But development has not stopped at this level.
Especially Garden Railroaders regret that many functions of Massoth decoders are not available on LGB Onboard Decoders.
The brand new XLS-Onboard Sounddecoders fill this gap.


All connectors of a LGB Onboard Locomotive can be plugged in the XLS-Onboard Decoder straight away.


 
No soldering, no screwing. Just replace the Onboard Decoder and Soundmodule with this single


XLS-Onboard Sounddecoder.
This is easily possible even for inexperienced laymen.


After that your LGB locomotive will have a state-of-the-art sound decoder.


 


Dimensions: 65 x 40 x 18 mm


Manual: http://wiki.massoth.de/images/1/11/991092_BDA_eMOTION_XLS_Onboard_2016_10.pdf


Mikado steam loco


eMOTION XLS Sound Decoder
Powerful 3 Amp Sound Decoder with up to 6 sound channels and 13 function outputs. Usable for locomotives with up to two motors.
NEW VERSION INCLUDES THE FOLLOWING FEATURES:
BREAK ON DC
Breaking with a special polarized DC-Voltage
VOLUME CONTROL OF EACH OPERATION SOUND TYPES
These 4 operation sound types can be adjusted seperately:



  • Initial start sequences

  • Standing sound sequences

  • Shut down sequences

  • Operation sound sequences


LGB® OR SUSI INTERFACE INTEGRATED.

The new eMOTION XLS Sound Decoder is the up and coming standard of the exquisite garden model railroad sound decoders. The XLS features a powerful output stage for up to two motors (3 AMPS) as well as 1 AMP for sound, light, and other functions.
Additionally, 11 function outputs including 3 light outputs and 4 contact inputs are available which makes this unit exceptionally feasible.
The integrated sound power amplifier with 6 independent sound channels sets the standard in today's locomotive sound simulations. The audio power amplifier delivers 1 watt (sinus) at 8 ohms impedance. The eMOTION XLS Sound Decoder delivers optimum characteristics for analog and digital operation.

Optimized Analog- and Digital operation guaranteed
The XLS works in analog mode starting at the lowest voltage possible. The settings and functions of the decoder may be set with the DiMAX PC Module and may be used in analog mode. Thus sounds may be triggered in analog mode via reed contacts.
Once again we would like to point out that sound- and software updates can only be performed with the DiMAX PC-Module (8175001)

NMRA DCC and LGB® MZS
The eMOTION XLS is compatible to NMRA/DCC and works with all generations of the LGB® MTS systems. State of the art DATAFLASH technology and the latest programming procedures enable the reloading of sounds and software directly via the track.

ORIGINAL SOUND in digital quality

The XLS is delivered with a HiFi loudspeaker (57 mm) with a metal cap and an interface cable for LGB® and Aristocraft DCC. The unit may be installed wire by wire as well. Mounting material is provided.
Here you can find the list of loudspeakers of each loco.

Technical Data Drive Decoder:
- NMRA/DCC compatible
- LGB® MTS I, II, and III compatible
- best driving characteristics with analog op. (selectable)
- 14, 28, and 128 Speed Steps
- 256 internal speed steps
- 10239 Locomotive Addresses
- Automatic Detection of operating mode and speed steps setting
- 3.0 Amps max. continuous output (drive stage)
- 4.0 Amps max. maximum total output (incl. functions)
- Adjustable Motor frequency
- Load Control in digital and analog
- Switching Speed (programmable)
- Adjustable Motor driving curve

Technical Data Sound Amplifier:
- 6 independent sound channels
- High end amplifier stage with 1 Watt output (sinus)
- Loudspeaker connection with 8 Ohms impedance
- Sound Storage Capacity up to 150 sec.

Technical Data Function Outputs:
- 3 Light outputs (front, rear, internal 0.3 Amps each)
- 6 Function outputs (0.6 Amps each)
- Programmable Special Functions
- Suitable for Power Buffer connection
- 1 Amp max output of all function outputs
- Intelligent function mapping up to F16
- Parallel and serial data processing (LGB® MTS Pulse Chain Control)
  and automatic detection (serial data processing disengageable)









PLEASE NOTE!
We suggest to measure the correct consumption of the corresponding locomotive before selecting the XLS decoder. Please look at our WIKI how to do this.
If the current consumption is close or above 3 amps, we urgently recommend to use the eMOTION XXL decoder with the eMOTION S Sounddecoder.



 Size in Millimeters: 60 x 32 x 18 mm
To view the picture from the original loco, click on the loco name. A new window will be opened.
Pictures will be advanced.
The Backgroundmusic in MP3-Demo Sounds are not present in XLS modules  





MASSOTH - 8216087 - XLS DECODER SOUND MIKADO

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

8216087 - XLS G Gauge DCC/Sound MIKADO Steam Loco

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.