All Aboard Logo

Australia's LARGEST model train store

Open 24/7 online

Showroom open 930am to 430pm

Closed Easter long weekend Friday 10th to Monday 13th

(closed Sundays and Public Holidays)

202 Bong Bong Street, Bowral, NSW 2576

Call us on 0248712966

 

Open 24/7 online
Showroom open 930am to 430pm
202 Bong Bong Street, Bowral, NSW 2576
(Closed Sunday and Public Holidays)
Call us on 0248712966

ESU - 53900 - DECODER TESTER

Write a review

$98.51

Availability: Out of stock

 

53900 - DECODER TESTER


Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this?


The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance.


Features


To make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models:


Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that is all there is to it! Decoders without any interface can be contacted with individual terminals.


A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus, it is quite easy to check on the low-speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6.


For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation!


Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board.


The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points.


Extension


Now there is an extension board that enables you to also connect our large-scale decoders to the Decoder Tester. With this vast range of components your Profi Decoder Tester will soon be an indispensable aid in your workshop!


53900    Decoder tester for decoder.NEM651,652,21MTC,PluX22,Next18, Single wires. Coreless motor, LED monitor, 20mm spk., Extension port         


 53901   Decoder tester extension for LokSound XL V4.0, LokSound L V4.0 with LED monitor, servo connectors      

53900 - DECODER TESTER

Write Your Own Review

You're reviewing: ESU - 53900 - DECODER TESTER