Australia's LARGEST model train store

Open 24/7 online

Showroom open 930am to 430pm

(closed Sundays and Public Holidays)

68-72 Old Hume Hwy Mittagong NSW

Call us on 0248712966


Open 24/7 online
Showroom open 930am to 430pm
68-72 Old Hume Hwy Braemar NSW
(Closed Sunday and Public Holidays)
Call us on 0248712966

ESU - 58820 - LokSound 5 Micro DCC 8 Pin Bland NEM652

Write a review

$189.00

Availability: In stock

 

58820 - LokSound 5 Micro DCC 8 Pin Bland NEM652


The LokSound 5 micro is a „small miracle “: With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus, it should fit into all N gauge and TT vehicles but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.


Operating modes


The LokSound 5 micro is a true multi-protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course, it supports 14 through to 128 speed steps as well as 2- and 4-digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.


This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.


Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.


The M4 protocol supports the automatic registration on mfx® compatible central units.


The LokSound decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore, the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.


The LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.


Sound


The LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.


The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.


The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.


Functions


Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.


Motor control


Motor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus, the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies enough motor current (up to 0.75 A) for the intended applications. LokSound 5 micro DCC. The LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.


Ordering information


 Art.No. Description         Delivery


 58820   LokSound 5 micro DCC "blank decoder", 8-pin NEM652, gauge: N, TT, H0


 58828   LokSound 5 micro DCC "blank decoder", Next18, gauge: N, TT, H0             


 58810   LokSound 5 micro DCC/MM/SX/M4 "blank decoder", 8-pin NEM652, with Speaker 11x15mm, gauge: N, TT, H0               


 58813   LokSound 5 micro DCC/MM/SX/M4 "blank decoder", single wires, with Speaker 11x15mm, gauge: N, TT, H0               


 58814   LokSound 5 micro DCC/MM/SX/M4 "blank decoder", PluX16, with Speaker 11x15mm, gauge: N, TT, H0   


 58816   LokSound 5 micro DCC/MM/SX/M4 "blank decoder", 6-pin NEM651, with Speaker 11x15mm, gauge: N, TT, H0               


 58818   LokSound 5 micro DCC/MM/SX/M4 "blank decoder", Next18, with Speaker 11x15mm, gauge: N, TT, H0   

58820 - LokSound 5 Micro DCC 8 Pin Bland NEM652

Write Your Own Review

You're reviewing: ESU - 58820 - LokSound 5 Micro DCC 8 Pin Bland NEM652