59622 - LOKPILOT 5 DCC PLUX22 NEM658
The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two shares almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analogue AC systems. This lack of flexibility comes with a cheaper price.
LokPilot 5 decoders are offered with all common interfaces.
The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU Cab Control.
The decoder accepts all DCC programming modes and thanks to RailCom® the CV values can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.
The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACK Commands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltage is possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two train stations.
The LokPilot 5 DCC decoder can be used on analogue DC trains. The top speed can be set separately.
The decoder switches between the operating modes fully automatically "on-the-fly".
We know that you want your locomotives to be as realistic as possible. Therefore, we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCC Decoder at least 10 amplified function outputs with 250mA output current each. In the executions with PluX22 or 21MTC interface there are 4 outputs to control servos or Logic level outputs added. All-important lighting functions are available. The brightness of each output can be set separately. The decoder masters automatic pushing and pulling when uncoupling for ROCO®, Krois® and Telex® couplings.
The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors. Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs which can be adjusted for difficult cases. The unique "Autotune" function enables the automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.
On request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.
Of course, all function outputs and the motor output are protected against overload.
We want you to enjoy your decoder for as long as possible.
ALL ABOARD Ordering information
Art.No. Description Delivery
NEW! 59620 LokPilot 5 DCC, 8-pin NEM652, gauge H0 ,0
NEW! 59622 LokPilot 5 DCC, PLUX22 NEM658, gauge H0 ,0
NEW! 59626 LokPilot 5 DCC, 6-pin NEM651, gauge H0 ,0
NEW! 59629 LokPilot 5 DCC, 21MTC NEM660, gauge H0 ,0
NEW! 59659 LokPilot 5 DCC, 21MTC MKL, gauge H0 ,0