6170 - Turnout left hand, for manual operation.
Length 200 mm (standard length), branch angle 18°, branch radius 647 mm, frog angle 12°.
Standard turnouts: The standard turnouts 6170 and 6171 are the foundations for variable running operations on the model railway layout. Branch-offs from the straight can be made up with them. Extensive track layouts in the station area as well as storage sidings or industrial yards are made possible with them. The length of the straight section of the standard turnout is 200 mm, corresponding to one 6101. The branch-off section of the turnout corresponds to a curved track 6138. By connecting track 6138 onto the branch-off part of the turnout, the distance of 63.5 mm is once again achieved in the parallel track.
In the area around the frog of the turnout, the turnouts are fitted with contact surfaces so that the flanges of the wheels can pick up power. The frog angle is 12°. The turnouts are fitted with sprung turnout blades, so that they can be run through from the frog end, even if the turnouts are set in the opposite direction.
The turnouts are available for manual operation. Of course, the manual turnouts can be fitted with electric motors later. This turnout motor can be mounted above the baseboard surface, or even underneath the baseboard. It is then necessary to cut a hole in the baseboard to accommodate the turnout motor.
ALL ABOARD recommend
Standard straight track 200mm Art. No.: 6101
Straight track 105mm Art. No.: 6102
Straight track 100mm Art. No.: 6103
Flexible Track with ballast base 800mm Art. No: 6106
Track straight, 10mm Art. No: 6107
Flexible Track with ballast base 800mm Art. No.: 6109 concrete sleepers
Adjustable Straight Track 80 to 120mm Art. No.: 6110
Buffer for Profi track Art. No.: 6117
Curved track R1, 36° 356.5mm 10 to circle Art. No.: 6120
Curved track R1, 18° 356.5mm 20 to circle Art. No.: 6122
Curved track R2, 36° 420 mm 10 to circle Art. No.: 6125
Curved track R2, 18° 420 mm 20 to circle Art. No.: 6127
Curved track R3, 18° 483.5 mm 20 to circle Art. No.: 6131
Curved track R4, 18° 547 mm 20 to circle Art. No.: 6133
Curved track, 18° Ri 647mm Art. No.: 6138
Curved track, 7.5° Ri 788mm Art. No.: 6139
Turntable with motor and switch Deck 310 Art. No.: 6152
Three-way turnout Art. No.: 6157
Turnout left hand Art. No.: 6170
Turnout right hand Art. No.: 6171
Curved turnout left Art. No.: 6174
Curved turnout right Art. No.: 6175
High-Speed turnout left hand Art. No.: 6178
High-Speed turnout right hand Art. No.: 6179
Crossover track crossing, 36°. length: 105 mm. Art. No.: 6160
Crossover track left hand crossing, 18°. length: 200 mm. Art. No.: 6162
Crossover track Right hand crossing, 18°. length: 200 mm. Art. No.: 6163