9152-Turntable N Gauge electric, C type
Model Turntable, electrically driven, with individual electrically switchable track exits, with turntable switch 6910. Length of the turning bridge 183 mm.
The turntable is sunk into the ground, exactly like the real thing and is complete with all the correct detailing.
The basic turntable has 6 exit tracks and 4 stub tracks.
The track exits are set at 7,5° intervals, but can be altered if desired, or extended with the extension set 9153 up to total of 48 track exits.
The "thinking" turntable: The turntable movement is controlled by using the switch 6910, in order to reach the desired track exit.
The track power feed is via the turntable bridge.
Now the switch 6910 will enable the desired track exit, which is lined up with the turntable, to be electrically switched on.
All the other track exits (even one directly opposite) will remain without power. In this way, each of the maximum of 48 track exits can be individually controlled and electrically switched on, without the need for any additional wiring.
Note: Control your turntables easily – with TURN-CONTROL, the electronic turntable control device (item No. 6915).
ALL ABOARD recommend
Turntable Controller with track pre-selection Art. No.: 6915 Also for Digital use
Turntable extension set for turntable 9152 Art. No.: 9153
Locomotive roundhouse (kit) Art. No.: 9475
Fleischmann Oil Art No.: 6599
Track Rubber Art No.: 6595
Track straight, length 222mm Art No.: 9100
Straight track, length 111 mm. Art. No.: 9101
Three-way point for manual operation, length 111 mm. Art. No.: 9157
Left hand standard point for manual operation, length 111 mm Art. No.: 9170
Right hand standard point for manual operation, length 111 mm Art. No.: 9171
Left hand curved point for manual operation Art. No.: 9174
Right hand curved point for manual operation Art. No.: 9175
Straight Track 111mm Art 9101
Straight Track 57.5mm Art 9102
Straight Track 55.5mm Art 9103
Straight Track 27.5mm Art 9104
Flexible Track 777mm Art 9106
Straight track extendable from 83 to 111 mm. Art no 9110
Manual uncoupler track, length 111 mm. Art No 9114
electric motor can be clipped in later for 9114 Art No 9444
Buffer stop, length 57,5 mm. Art No 9116
Curve Track Radius 1: 192 mm Art No 9120
Curve Track Radius 2: 225.6mm Art No 9125
Curve Track Radius 3: 396.4mm Art No 9130
Curved track, radius R4, 15°. Art. No.: 9136
Track pack. Station Set B Art. No.: 9189
Track pack. Shunter Set C Art. No.: 9190
Track pack. Complete Set D Art. No.: 9191
Track pack. Three-way point Set E Art. No.: 9194
Track pack. Platform Set F Art. No.: 9196
Analogue Starter Set: Diesel locomotive class 212 and goods wagon, DB AG Art. No.: 931705
Turntable extension set for turntable 9152 containing 3 exit tracks and 3 over-run ends.
Electrically operated turntable Art. No.: 9152
Crossover 30°, length 115 mm. Art. No.: 9161