16060 - H0 Track profile machine USP 2000 SWS Plasser & Theurer
H0 ballast distribution and profiling machine USP2000SWS PLASSER & THEURER"
Kit. Prototype data: LüP 19 m, pivot spacing 11.5 m, total mass 55 t, engine power approx. 400 kW, max. Driving speed 100 km / h. Machine with 2 2-axle bogies for tracks and switches with a ballast silo, equipped with a divided central plow.
Suitable for ploughing in tracks with a line conductor, whereby the ballast flow can be precisely dosed using a symbol button.
The flank plow brings the ballast from the area of the bed flank to the bed crest.
Sweeping device with reversible cross conveyor belt for depositing the excess ballast on a bedding flank. Inclined conveyor belt, ballast silo with floor conveyor belt and distribution devices are used to store and return ballast material.
Hydrostatic drive on all axles, UIC brakes, Large cab with driver's cabs and front windows made of safety glass.
The correctly defined bedding cross-section is especially important for securing the track position against warping.
The correct distribution of the ballast in the track as well as the recovery from the flank is a factor of maximum economic efficiency.
The treatment of the bedding surface, especially on the flanks, also has a beneficial effect against vegetation in the bedding area.
This is primarily a purely mechanical influence on the ballast surface.
On high-speed routes, it is important to carefully sweep the sleeper surfaces and the intermediate compartments in order to prevent ballast stones from being thrown up due to the high speeds.
With NEM shaft.
Dimensions: LüP 21.8 x W 4.2 - 6.5 x H 5.2 cm.
Difficulty level: 3