8101800 - Rolling Road H0 Scale, blue transparent (Set for 3 axles)
Usable for all two and three track systems
Extra small dimensions
The system can handle locomotives with wheel spacing down to 14 mm, thus serving all known HO models.
Two metal contacts pass the power from the tracks to the wheels of the locomotive via the sliding wheels.
The backbone of the design is a durable blue block of glass-fibre reinforced plastic.
This serves as an insulator as well as positioning the unit properly.
A contact spring provides an additional contact for third-rail-track systems.
Thus the Massoth ROLLER STANDS are suitable for all HO track systems.
Guiding wheel surface confirm with NEM A highlight of the design is the 3° bevel of the guiding wheel surfaces which correspond exactly with the European Model train Standards (NEM).
Because of their unique shape the guiding wheels offer the best running characteristics.
This proven superior design features an optimum power pick-up system with no wear to the guiding wheels or the locomotive wheels.
The Massoth ROLLER STANDS serve all types of HO locomotives, even older types that do not meet the NEM Standard wheels.
The height of the locomotive wheels above the tracks is between 7 and 8 Millimetres depending on the diameter of the locomotive wheels.
The guiding wheels diameter is approximately 6.5 Millimetres.
The Massoth HO SCALE ROLLER STANDS come with 3 axle supports and a contact spring for third-rail-systems.
All features of the Massoth ROLLER STANDS are patented. Rolling Tracks HO • wheel support with 3° bevel according NEM Standards • minimum axle distance 14 Millimetres • track width 16.5 Millimetres • diameter of guiding wheels approx. 6.5 Millimetres • locomotive wheel height above track approx. 7 to 8 Millimetres depending on locomotive wheel diameters 1 set contains 3 wheel supports and a manual Dimensions: (one wheel support) 14 x 22 mm