DIMAX PC Module 2018 unit
The Massoth DiMAX PC Module offers an easy way to update the firmware of Massoth DiMAX Digital bus components such as the Navigator, the feedback module, and the RC receiver. It may also be used for programming Massoth decoders or updating their firmware.
The module is required for updating the firmware and changing the sound of Massoth sound decoders.
When used in conjunction with Massoth's DCC programmer software, the module can read CV values from and write CV values to all kinds of DCC components e.g. digital decoders, sound decoders, and other digital components.
A USB cable to connect the Module to PC is provided; a SUSI fast-update cable for updating decoders equipped with a SUSI interface is also provided.
A 16-24V DC power supply (2 Amps minimum) is required to operate the module.
1 Plug and Play USB interface to connect to a PC
1 DiMAX terminal to update Massoth bus components
1 4-pin connector for fast-update of decoders equipped with a SUSI interface
1 output terminal to connect a programming track for updating and programming decoders
1 power terminal for connecting a DC power supply
Supply voltage: 16-24 V DC, DC ONLY
Current: 30mA at idle
Programming voltage: 14 V
Programming current: 1.5Amps
Temperature range: -4°F to 113°F
DiMAX PC Module
USB 2.0 cable
SUSI update cable