All Aboard Logo

Australia's LARGEST model train store

Open 24/7 online

Showroom open 930am to 430pm

(closed Sundays and Public Holidays)

202 Bong Bong Street, Bowral, NSW 2576

Call us on 0248712966

 

Open 24/7 online
Showroom open 930am to 430pm
202 Bong Bong Street, Bowral, NSW 2576
(Closed Sunday and Public Holidays)
Call us on 0248712966

MASSOTH - 8240001 - eMOTION XLS - self-programmable only (1/pack)

Write a review

$309.95

Availability: In stock

Only 1 left

 

Sound Decoder - eMOTION XLS self-programmable only (1/pack) MASSOTH - 8240001


ALL ABOARD will add the sound no charge 


The Massoth emotion XLS decoder is a powerful 4.0Amps driving, function, and sound decoder designed for installation in G scale locomotives equipped with 1 or 2 driving motors.


The XLS features a 3.5Amps output stage for up to two motors, 3 light outputs, 8 function outputs, 4 contacts inputs, a Massoth-SUSI interface, and an integrated 3-watt high performance sound amplifier with 6 independent sound channels.


The XSL offers selectable 14/28/128 speed steps, analogue and digital operation, digital and analogue Back EMF, and overload-overheat protection for motor and function outputs.


The decoder holds a little over 3 minutes of high-quality digital sound. It stores a locomotive's prototypical operating sounds as well as an array of additional sounds that may be configured to suit individual tastes. The integrated digital power amplifier reproduces all sounds and side noises of a locomotive authentically.


Operating the XLS decoder with an additional power buffer increases its dependability: brief track power disruptions are bridged in analogue and digital operation and contaminated tracks and switch frogs are negotiated without any speed changes or interruptions.


The XLS decoder comes with an LGB® DCC interface cable to simplify installation in locomotives equipped with an LGB® DCC interface. An optional interface cable to simplify Installation in locomotives equipped with LGB® six-pin decoder interface is available (product # 8312061).


The eMOTION XLS sound decoder supports the full NMRA protocol, and is compatible with all generations of the LGB® MTS system.


Summary of Features:


Total amperage: 4.0Amps


Motor amperage: 3.5AMps


Light and function outputs amperage: 1.3Amps


Compatible with NMRA DCC and all generations of LGB® MTS systems


Serial and parallel control of all lights and function outputs, including LBG® P-sound updates


Digital and analogue operation with automatic recognition


10239 Locomotive addresses


14/28/128 speed steps


256 internal speed steps


Programmable speed curve


Adjustable starting, mid, and maximum speed


Adjustable acceleration and deceleration time


Adjustable motor frequency (90Hz-16kHz)


Latest load control technology, Back-EMF, analogue and digital


Switching speed activated with mappable function key


3 light outputs, 3 x 300mAmps (front, interior, and rear)


8 function outputs, 4 x 600mAmps (F1-F4), 4 X 10mAmps (F5-F8)


2 Reed contact inputs


RC servo control channel


Connection for optional power buffer


Connection for programmable pulse generation function


Massoth-SUSI interface


Light and function outputs dimmable; can be activated in analogue operation


Programmable blinking lights, short-duration function, and pulse generator function


Easy to use function mapping


Free command allocation of all function outputs (F1-F16)


Rest function for all CV values


Overload protection for function outputs


Overheat protection for function outputs


Sounds and firmware updatable


Sound Features:


3 watts hi-performance amplifier for 8 Ohms speaker


6 channel play-back (6 sounds at the same time)


Memory capacity for max. 200 sec. of recorded sound


4 driving sounds, and 12 side noises, selectable


play-back frequency: 16KHz


Volume control by potentiometer or CV programming (also individual sounds)


Sound functions usable in analogue mode


Features for Mallets, Rack Rail locomotives, and Dual Powered Locomotives: (1) The XLS Decoder has 2 separate inputs for synchronizing chuffs to wheel rotation in locomotives with two steam pistons like Mallets or steam rack rail Locomotives. (2) Starting with version 2.5, you can use CV 170 to define a function key which, when pressed, will activate/deactivate the rack noise on a steam rack rail engine, or switch the sound from electric to diesel and vice versa on a dual powered locomotive.


Technical specifications


Power supply: 0-24 Volts DC/DCC


Maximum total load: 4.0Amps


Motor output: Max. 3.5Amps, 70Hz-16kHz, load controlled, digital and analogue


Light outputs: Max.(3 X 300mAmps) 22V dimmable


Function outputs:(4 X 600mAmps), (4 X 10mA)


Total light and function outputs combined: Max. 1.3Amps


Loudspeaker 8 Ohms (Min. 1.5 watts)


Temperature range: -4°F to 113°F


Dimensions: 55x32x15mm


Contents


eMOTION XLS Decoder


One loudspeaker (see listing below)


2 sets of LGB® motor-block connecting cables (4 pieces each)


2 screws 2.9x13 mm


2 screws 2.9X19mm


User's Manual

Sound Decoder - eMOTION XLS self-programmable only (1/pack) MASSOTH - 8240001

Write Your Own Review

You're reviewing: MASSOTH - 8240001 - eMOTION XLS - self-programmable only (1/pack)